Home >> sunray satellite receiver >>SUNRAY 800 hd se A8P Card satellite receiver
Sunray 800 HD SE with A8P Card satellite receiver TV receiver
Sunray 800 HD SE with A8P Card satellite receiver  TV receiver
  • Sunray 800 HD SE with A8P Card satellite receiver  TV receiver
  • Sunray 800 HD SE with A8P Card satellite receiver  TV receiver
  • Sunray 800 HD SE with A8P Card satellite receiver  TV receiver
  • Sunray 800 HD SE with A8P Card satellite receiver  TV receiver

Sunray 800 HD SE with A8P Card satellite receiver TV receiver

Special price: [ $165.00 ]
Sunray 800 HD SE A8p card satellite tv receiver

1.Enigma 2, Linux Operating System.
2.DVB-S(S2)Tuner.,Flash 64 Mb,Ram 256MB,REV.D,Configurato
3.Newest motherboard Rev .D

if you want to know wholesale discount price,please contact us by e-mail.

Note:
If your shipment is delivered to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp

Sunray 800 HD SE DVB-S2 tuner satellite tv receiver Specifications:

Product Description:
400 MHz MIPS Processor
Enigma 2, Linux Operating System
colored OLED - Display
MPEG-2 / H.264 Hardware decoding
Tuner Module, Plug&Play
2 x Smartcard-Reader (Dreamcrypt CA)
Mini USB for Service and software update
10/100Mbit Ethernet Interface
1 x Scart (RGB, FBAS or S-Video)
HDMI
3 x USB 2.0 (e.g keyboard)
analog modem
S/PDIF Interface for digital bit stream out (AC-3)
DVB-S2
SATA
- for internal HDD 2,5 inch
unlimited channel lists for TV/Radio
channel-change time < 1 second
automatic service scan
directly bouquet-lists
EPG (electronic program guide)
multiple LNB-Switching control (supports DiSEqC)
OSD in many languages and skin-support
Videotext Decoder
extern 12V power supply
Technical Data:
DBS-Tuner mit DVB-S2:
Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 ĘC 31 Mbaud/s (8PSK) , 10 ĘC30 Mbaud/s (QPSK)

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible, H.264
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:

Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:

Output: FBAS, RGB, S-Video
Mini USB service connector:
Function: Update of Firmware

Ethernet:

10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
for internal 2,5" HDD
USB:

3 x USB 2.0
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:

DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:

< 15W at 12V
External PSU
Input: 110-240V AC / 50-60Hz / 0,6A

eneral
Product Type
Satellite TV receiver / HDD recorder (HDD required)
Width : 22.5 cm
Depth : 14.5 cm
Height : 5.2 cm
Weight : 0.94 kg
Enclosure Colour : Black

System
Features
Upgradable firmware, digital radio access

Audio System
Output Mode
Stereo
Digital Audio Format
Dolby Digital output

Digital Player (Recorder)
Internal Storage
Hard disc drive - 0 GB

TV Tuner
Type
Satellite tuner
TV Reception
DVB-S2
Frequency Range
950 - 2150 MHz

Built-in Display
Type
OLED

Slot(s)
Type
2 x Smart Card

Connections
Connector Type
SCART ( 21 PIN SCART ) - rear
SPDIF output ( TOS Link ) - rear
Phone line - rear
Ethernet ( RJ-45 ) - rear
HDMI output ( 19 pin HDMI Type A ) - rear
eSATA
2 x USB 2.0 ( 4 PIN USB Type A )

Miscellaneous
Included Accessories
Remote control, SCART adapter, HDMI cable, power adapter
Software : Linux

Power
Voltage Required
AC 120/230 V ( 50/60 Hz )
Power Consumption Operational
15 Watt

Main features are a 400 MHz processor, the Dvb-s2 800 HD se supports the Linux TV API

Have a look to HighDefinition TV on your Dvb-s2

10/100MBit compatible Ethernet Interface
HI connector
eSATA



Package included:

A8P card inside
Sunray 800hd se satellite receiver x1
remote control x1
power supply x1
HDMI cable x1
scart to av connector x1

´╗┐